Topics In Demand
Notification
New

No notification found.

 The Angle of Arrival and Precise Location Tracking
The Angle of Arrival and Precise Location Tracking

January 3, 2022

556

0

 

When it comes to accurate indoor location data, you can rely on the Angle of Arrival (AoA) method using the Bluetooth 5.1 standard. With AoA, the direction of the incoming signal is measured by observing the angular phase shifts between the antennas (of the receiving device) as they receive the RF signals. This data can be combined with the signal strength metrics (RSSI) to accurately pinpoint the location of an object or an asset in real-time. The location accuracy based on AoA is usually between 20-30 cm but may vary depending on several factors used in the positioning system. 

 

The triangulation-based process in AoA is one of the most used techniques for high precision location data. Read below to discover more about its working principle and use cases.

 

The Angle of Arrival- What Lays Behind the Technique

 

When employing the Angle of Arrival (AoA) technique, an asset tag or any other form of transmitting device will transmit a signal using one particular antenna. 

 

The signal will be received by a device, usually a fixed locator, that has antennas neatly packed in an array. Once the signal reaches the array, the receiving equipment collects the necessary inputs to calculate the direction of the incoming signal. 

 

Unlike the low-precision Bluetooth method used for earlier location tracking, the AoA positioning algorithm is ten times more accurate, offering high-precision location data. This ranging-based algorithm is used to determine the direction of the transmitting node signal, along with the exact angle between the anchor node and the unidentified node. Finally, triangulation or similar techniques are employed to measure the location of the unidentified node. 

 

AoA (Angle of Arrival) vs RSSI (Received Signal Strength Indicator)

 

Both AoA and RSSI are techniques to determine precise positioning data using Bluetooth technology. Even though both of these methods are used for gathering locations metrics, the working principle behind these approaches is different.  

 

When it comes to RSSI, the primary objective is to evaluate the signal strength of the transmitters attached to the assets. To understand the scenario, think about a stone dropped into the water and the resulting waves. These waves get weaker as the distance increases. This procedure of position determination is referred to as lateration, where the distance measurement is in relation to the strength of the signal. 

 

Locating the position of the objects using AoA involves a network-centered structure that employs angular estimation techniques. Here, the signal is transmitted from a single antenna. The incoming radio signal is received by a multiple-antenna equipped device called the locator. When it comes to three-dimensional positioning, the location is estimated through triangulation from a minimum of two locators.  

 

AoA Location Positioning Use Cases

 

Precise location positioning using AoA helps to enhance the performance efficiency of numerous sectors. The application of AoA location positioning is extensive. Regardless, the most popular use cases of this technique are highlighted below.   

  • AoA location tracking enables optimization of warehouse operations, including efficient staff and asset monitoring
  • Enterprises use this technique to monitor their staff, equipment, and transportation. In addition to this, the process can be utilized for creating virtual borders around hazardous zones to keep unauthorized entries in check
  • AoA positioning methods ensure efficient indoor navigation in healthcare facilities, along with improved customer satisfaction rates
  • The method also ensures employee safety by defining unsafe areas in the organizational premises
  • The sports industry employs this technique for updates on player performance and their location

 

Accurate tracking using the Angle of Arrival method has opened up numerous opportunities in various sectors. From employee safety to scaling operational performance, proper location positioning has countless benefits. Hopefully, we will see more AoA adoption rates in the future. 

 

Source -  The Angle of Arrival and Precise Location Tracking 

 


That the contents of third-party articles/blogs published here on the website, and the interpretation of all information in the article/blogs such as data, maps, numbers, opinions etc. displayed in the article/blogs and views or the opinions expressed within the content are solely of the author's; and do not reflect the opinions and beliefs of NASSCOM or its affiliates in any manner. NASSCOM does not take any liability w.r.t. content in any manner and will not be liable in any manner whatsoever for any kind of liability arising out of any act, error or omission. The contents of third-party article/blogs published, are provided solely as convenience; and the presence of these articles/blogs should not, under any circumstances, be considered as an endorsement of the contents by NASSCOM in any manner; and if you chose to access these articles/blogs , you do so at your own risk.


Pinmicro helps organizations create Digital Twins of business operations using highly accurate real-time location systems [RTLS] and IoT data.

© Copyright nasscom. All Rights Reserved.