Topics In Demand
Notification
New

No notification found.

Blog
Rig Automation, connected devices, and real-time data analytics are pushing the barrier for drilling optimization systems

November 15, 2019

682

0

Automated mechanics & steering, which can be termed as “rig automation,” is now increasingly being extended to address downhole conditions, advancing drilling optimization across the complete process through understanding the subsurface and its interactions with the downhole drilling system penetrating through the rock, the drill-string carrying power from the rig, and the drilling fluid system.  An automation console is designed to maximize drillers’ responsiveness towards maximizing the rate of penetration (ROP).  Drilling ROP optimizing software has already delivered significant improvements using the algorithm based on the real-time surface and downhole measurements and parameters of the top drive, drill-pipe, mud, and bit that quickly and reliably detects minute changes in actual downhole bit response.  The algorithm calculates parameters, such as weight on bit (WOB) and revolutions per minute, which delivers optimum ROP.  The ROP optimizer can be designed to monitor and control drilling parameters in a closed loop continuously during the drilling operation without the need for direct human intervention.

Real-time Data Analytics

Improvements in data transmission rates have enabled more bottom-hole mechanical measurements to become available at greater frequency.  These high-frequency sensors characterize bottom-hole assembly Rig Automation(BHA) phenomena, such as stick/slip, lateral vibration, and bit bounce, and condense these into actionable flags and control signals for the automation system.  An automated surface rotation control system that automates and optimizes the oscillation of the drill-pipe during slide drilling with a bent-housing motor has already delivered successful results.   Systems that fully automate and optimize well trajectory control for both Rotary Steerable Systems (RSS) and bent-housing motor assemblies are under development.

The systems will allow directional drillers to focus on drilling optimization and leverage their expertise across more than one operation in a remote command center environment.  Safety and well integrity remain of utmost importance.  Several related automated technologies are already being deployed and others are in development, along with systems to intelligently combine information to continually improve integrity.  One of the systems already delivering results is managed-pressure drilling (MPD), where bottom-hole pressure is dynamically managed within the mud-weight window.  MPD has enabled the successful drilling of wells with a narrow mud-weight window between pore pressure and fracture pressure where previous attempts had failed due to fluid losses.

Rig automation and connected devices

Advances in automating the drilling process will continue the trend toward improved and lower cost reservoir access, safely and consistently outperforming manual operations.  Care will be taken to ensure the automation is designed around the human operator and not the other way around.  In all cases, the driller on the drill floor will continue to have complete control to engage or disengage from the automation system.  Sharing expertise and resources through a factory drilling process will provide further economic benefits in appropriate situations.  Delivering effective and safe drilling automation will call for modified business models for the drilling industry.  Long-term engagements and performance-based remuneration that aligns the operator, automation provider, and drilling contractor will facilitate and accelerate the establishment of drilling automation.

To find out more on this please have a look at ARC’s recently investigated report on Oilfield Drilling Optimization Systems technology and competitive market.

“Reprinted with permission, original blog was posted here”. You may also visit here for more such insights on the digital transformation of industry.

About ARC Advisory Group (www.arcweb.com): Founded in 1986, ARC Advisory Group is a Boston based leading technology research and advisory firm for industry and infrastructure.

For further information or to provide feedback on this article, please contact RPaira@arcweb.com

About the Author:

Jyoti Prakash

Jyoti’s research focuses primarily on upstream oil and gas operational activities including digital oilfield technologies, upstream oilfield machinery, multiphase flow metering, intelligent pumps, oilfield operations management systems, artificial lift optimization, leak detection systems, and oilfield drilling optimization systems.

Jyoti evaluates technical and market trends for cross domain businesses across the globe focusing on trends in IIoT, modularity, digitalization, blockchain technologies, and digital twins for upstream and midstream oil & gas industry.


That the contents of third-party articles/blogs published here on the website, and the interpretation of all information in the article/blogs such as data, maps, numbers, opinions etc. displayed in the article/blogs and views or the opinions expressed within the content are solely of the author's; and do not reflect the opinions and beliefs of NASSCOM or its affiliates in any manner. NASSCOM does not take any liability w.r.t. content in any manner and will not be liable in any manner whatsoever for any kind of liability arising out of any act, error or omission. The contents of third-party article/blogs published, are provided solely as convenience; and the presence of these articles/blogs should not, under any circumstances, be considered as an endorsement of the contents by NASSCOM in any manner; and if you chose to access these articles/blogs , you do so at your own risk.


© Copyright nasscom. All Rights Reserved.