Topics In Demand
Notification
New

No notification found.

Blog
Some More IIoT Case Studies Showcased at ARC's Fourteenth India Forum – Part 2

August 16, 2016

IOT

493

0

By Amruta Kanagali?

In continuation with the IIoT Case Studies Part 1, below follow some more IIoT Case Studies. These case studies are based on information shared during the recently concluded Industry Forum titled “Industry in Transition: Navigating the New Age of Innovation” in India. This blog focuses on the case studies presented by R. S.  Kulkarni & Jeetendra Bhavrani (Nuclear
Fuel Complex, Hyderabad), Lokesh Payik, Head of Smart Manufacturing (General Manager Bosch) and R. Sarangapani (Additional General Manager, NTPC).

Case Studies:

NFC

In their joint presentation, R. S.  Kulkarni & Jeetendra Bhavrani gave a joint presentation on the application of modern techniques in manufacturing. They spoke about the company’s activities from “ore to core.” Showing the fuel assemblies and structural manufactured at NFC, they explained the architecture of the modernized system, and the efficacy of their e-cam solution in overcoming irregularities and eccentricities. They discussed a new concept of electronic-camming NFC has employed, while carrying out retrofitting of obsolete dc servo motors & drives with AC servo motors & drives, in this manufacturing process. This electronic-CAM runs as a virtual master in a motion controller software and electronically generates the position set points for each axis and transfers them to networked AC Drives. The designer now enters the data in an excel file or CAM table with a feasibility of entering 1000 points for linear interpolation.

The technology delivers

  • better accuracies,
  • smoother profile due to more number of points,
  • faster design to delivery times,
  • Improved safety and reliability of the manufacturing process
  • Electronic compensation of mechanical errors.

BOSCH

Mr. Lokesh Payik, Head of Smart Manufacturing, General Manager, Bosch shared his views on  Industrie 4.0 and how it
facilitates smart and sustainable manufacturing. A survey conducted by Bosch, a chair member of the Industrie 4.0 framework, reveals that projects that have deployed the approach have improved KPIs in the manufacturing environment. Mr. Payik said that Industrie 4.0 is the “Internetting of all Things and cyber-physical systems.” Bosch’s seven criteria for Industrie 4.0:

    • Fast integration and flexible configuration
    • Open standards
    • Virtual real-time representation
    • Digital lifecycle management
    • Secure value creation network
    • Distributed intelligence; and
    • People at the center of all the above

    In a case study, an agricultural pump manufacturer deploying Industrie 4.0 improved productivity by 25 percent; reduced downtime by 20 percent; and provided real-time visibility and performance monitoring.  In another case study shared by Mr. Payik a large automotive OEM was facing issues with its warrant analytics. Every time a product was released, they
    needed to predict a warranty claim.  when they worked with automotive OEM. They were unable to predict it properly and
    the deviation was 60-70 percent. Bosch provided warranty analytics and helped realize almost 6 million worth saving. Bosch helped in ensuring that the deviation came down to 4-5 percent.

    Mr. Payik also spoke about the APAS family, robots that work in tandem with the humans. These robots are made specifically to ensure human safety and consist of 180 sensors. To explain further, he showcased a video demonstration
    of the robot. The robot comprises of a sensor skin which stops the robot when it detects a human being in 5 cm radius. Also, once the human is outside the danger zone (about a meter radius) the speed switch in the robot gets activated it proceeds to operate faster.

    NTPC:

    Mr. R. Sarangapani, Additional General Manager, NTPC, explained how connectivity and interoperability can be enhanced through unified HMI. NTPC had a TG package of 650 MW. This had 2 DCS – one for integral control and one to balance the TG package. One was provided by Siemens and one by maxDNA through BHEL. NTPC needed a unified HMI. The scheme was discussed extensively by Siemens, BHEL and NTPC. All the signals of Siemens were then transferred to BHEL systems and the native HMI of the Siemens Systems was kept separately in the programmer room. This scheme was extensively tested at Siemens, Germany. There were two very important parameters in the testing – due to different HMI they ensured that the latency response time remained undisturbed and the redundancy of links. It was ensured that the TG system was commissioned by the unified HMI only and not the native HMI. Encouraged by this success, NTPC has specified that the future projects should have unified HMIs.

    End-users of technology must be aware of what is available in the market and make informed Choices accordingly. 

    Case studies, such as these presented at this forum, provide insightful information and feedback to all parties as to what to expect, how to implement, and the quantifiable benefits of deploying new technologies.

    About ARC Advisory Group (www.arcweb.com): Founded in 1986, ARC Advisory Group is a Boston based leading technology research and advisory firm for industry and infrastructure.

    For further information or to provide feedback on this article, please contact nsingh@arcweb.com


    That the contents of third-party articles/blogs published here on the website, and the interpretation of all information in the article/blogs such as data, maps, numbers, opinions etc. displayed in the article/blogs and views or the opinions expressed within the content are solely of the author's; and do not reflect the opinions and beliefs of NASSCOM or its affiliates in any manner. NASSCOM does not take any liability w.r.t. content in any manner and will not be liable in any manner whatsoever for any kind of liability arising out of any act, error or omission. The contents of third-party article/blogs published, are provided solely as convenience; and the presence of these articles/blogs should not, under any circumstances, be considered as an endorsement of the contents by NASSCOM in any manner; and if you chose to access these articles/blogs , you do so at your own risk.


    © Copyright nasscom. All Rights Reserved.